Slim Stratux Case
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Slim Stratux Case
- Ocena
- 5 / 5
- Polubienia
- 21
- Pobrania
- 120
- Wydruki
- 3
- Wyświetlenia
- 1153
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Attribution
I made my own case to assemble the Stratux kit.
The idea is to keep the antennas in place, but occupying the smallest area.
I'm using 1 fan (30x30x7mm), it came with several screws and nuts and I'm using 10 screws and 8 nuts. (M3x15, but M3x20 works as well)
4 screws and 4 nuts to hold the fan. I'm actually using 3 because the 4th would hit the AHRS module, but I uploaded a new version with this problem fixed.
2 screws and 2 nuts to hold the Raspberry Pi in place (check the pictures)
The other 4 screws and 2 nuts are used to put the 2 parts together.
Besides that you will need all the parts required to build the Stratux, plus the suction cup holder (you might use a different king, but maybe you need to make some adjustments)
And finally, if you want to print the GPS shield (it's optional), you will need some [copper tape] (https://www.amazon.com/gp/product/B07NWLWJ96/ref=ppx_yo_dt_b_asin_image_o00_s00?ie=UTF8&psc=1) to cover it.
=====
If you'd like to support me you can post a make, comment and/or pay me a coffee at PayPal
Print Settings
Printer Brand:
TEVO
Printer:
Tarantula
Rafts:
Doesn't Matter
Supports:
Yes
Resolution:
0.2mm
Infill:
20%
Filament: Hatchbox PETG Dark Yellow
Category: Gadgets