TL Smoother Rack
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
TL Smoother mount for 3D printer's frame
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 12
- Wydruki
- 0
- Wyświetlenia
- 225
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution
WARNING: Read before you print or even buy a TL Smoother: So far I've never seen someone saying how hot a tl smoother can get while you print something. I've printed my rack with PLA and after 30 min it's getting deformed due to the heat. I'm not sure if this high temp is normal... I might try to print using Nylon to see if it can hold it's shape.
In any case, I'm not sure if it's safe to install that, risking to set everything on fire. If anyone has some advise, please let me know, thanks!!
I created it to fix 4 TL Smoothers on my Tevo Tarantula.
Based on the size of a specific TL Smoother, might not work for different types.
But if you are using the same as I, it has enough space for the heatsink.
I used the control board offset (https://www.thingiverse.com/thing:2076166) as a base to my model.
=====
If you'd like to support me you can post a make, comment and/or pay me a coffee at PayPal
Print Settings
Printer Brand:
TEVO
Printer:
Tarantula
Rafts:
Doesn't Matter
Supports:
Yes
Resolution:
0.2
Infill:
20%
Filament: Hatchbox PLA Orange
Notes:
4 perimeters, top and bottom.
Category: 3D Printer Accessories