Artistic spool holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
SPOOL HOLDER SAVE - MATERIAL design Doesn't need SUPPORT Requires an external stand Requires an internal rod 4.5 mm…
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 14
- Wydruki
- 0
- Wyświetlenia
- 153
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Noncommercial
SPOOL HOLDER
- SAVE - MATERIAL design
- Doesn't need SUPPORT
- Requires an external stand
- Requires an internal rod
- 4.5 mm internal radius
- 26.25 mm external radius (it sould fit the most commons spools)
This spool holder is originally made for an Anet A8 printer, but it's fine for every other printer. Basically, it's an internal support for the spool which allows you to make it roll around a central metallic rod. Support for the rod is not included.
That curious shape allows to:
- Use less material possible
- Print WITHOUT ANY SUPPORT
- Have a nice design
Print Settings
Printer:
Anet A8
Rafts:
Yes
Supports:
No
Resolution:
0.1mm
Infill:
100%
Notes:
The shape of this spool holder allows you to print it WITHOUT ANY SUPPORT.
Instead you WILL NEED RAFT to make it stable and sticking during printing. The 6 internal rays are intended to have an internal raft also if you choose to print it thin. Obviously they're intended to be removed after printing.Post-Printing
The shape should be simple enough to have a good final result with any printer; probably you will need to manage a little stringing if your parameters are not perfecly tuned.
Category: 3D Printing