Ender / Aquila Tool Rig
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a remix of https://www.thingiverse.com/thing:2793693. I also used the end clip from…
- Ocena
- 5 / 5
- Polubienia
- 4
- Pobrania
- 25
- Wydruki
- 1
- Wyświetlenia
- 331
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution
This is a remix of https://www.thingiverse.com/thing:2793693. I also used the end clip from https://www.thingiverse.com/thing:2917932
I wanted to make this compatible with the Ender and Aquila printers so I've raised the height of the tool trey so it is well out of the way of the Z axis which is on the outside of the shafts on an Ender and Aquila.
Print Settings
Printer:
Aquila x2
Rafts:
Doesn't Matter
Supports:
No
Resolution:
0.2
Infill:
20
Filament:
Flashforge PLA
Notes:
If your printer doesn't like even small overhangs, you can print the shaft vertically. Just make sure you use a brim of at least 5mm for adhesion if you do print it vertically.
Category: 3D Printer Accessories