Pool vacuum
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A simple (yet very effective) pool vacuum system.
- Ocena
- 4 / 5
- Polubienia
- 58
- Pobrania
- 182
- Wydruki
- 1
- Wyświetlenia
- 3836
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Noncommercial
A simple (yet very effective) pool vacuum system. The design consists of 3 parts to be printed and a 1" hose (corrugated pond tubing) to be bought at your local hardware store.
The wand-slang connector fits into the suction port of your pool. The hose has a spiral on the outside and the connector can be screwed onto the hose.
Zuigmond_1 and Zuigmond_2 have to be glued together (2 parts are easier to print) and can be screwed onto the hose aswell.
Have been testing it for three weeks now and works fine (didn't finish vacuuming on the picture). Don't forget to clean your filter ;-)
I hope you enjoy this print!