Tesla Model 3 Jack Pad Stud
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Turn a hockey puck into a tesla jack pad with this stud. This is a remix of a very nice design:…
- Ocena
- 5 / 5
- Polubienia
- 20
- Pobrania
- 46
- Wydruki
- 1
- Wyświetlenia
- 1518
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial
Turn a hockey puck into a tesla jack pad with this stud. This is a remix of a very nice design: https://www.thingiverse.com/thing:3109796
I tried that design, and it works pretty well. Its designed for a rigid filament though, like PLA or PETG. Those are a little too brittle for my tastes, and I wanted something that had less chance of breaking when I insert it into the car. I think Nylon would be a good choice for that original design, but I didn't have any on hand. I did have some TPU though...
The original finger design with TPU was too flexible. The jack pad didn't stay in the hole on its own. So I re-designed it to be a closed circle design. There is enough flex in the TPU to not need the cut outs at all.
Just print 4 of the pegs and one drill guide (the drill guide just locates the hole in the center for you). Use the drill guide to drill out a hole in 4 hockey pucks. Then screw the pegs onto the hockey pucks.
Now throw them in your car. You never know when you'll need to jack the car up. You need 4 incase you take it to a shop and they want to put it on a lift.
Category: Automotive