Tesla Wheel Center Cap - Color Inset
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The original center cap that I made up had either inset or raised logos, but it was just a single color. A number of…
- Ocena
- 5 / 5
- Polubienia
- 37
- Pobrania
- 208
- Wydruki
- 5
- Wyświetlenia
- 1261
- Oceny
- 5
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution
The original center cap that I made up had either inset or raised logos, but it was just a single color. A number of folks have remixed it into a two-part print so you could print the logo separate from the base and get two colors.
I saw this nice tutorial on how to print multi-color objects with a single extruder (as long as you only need multi-colors on the first few layers): https://www.youtube.com/watch?v=KV2AjyowXX4
So i re-mixed the wheel center caps to work with this approach.
Category: Automotive