k-edge go-pro-mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Designed to bolt onto the k-edge mount for garmin's and wahoo elemnt. Inspired by the mount I found here:…
- Ocena
- 5 / 5
- Polubienia
- 42
- Pobrania
- 764
- Wydruki
- 4
- Wyświetlenia
- 1944
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution
Designed to bolt onto the k-edge mount for garmin's and wahoo elemnt. Inspired by the mount I found here: https://www.thingiverse.com/thing:2311307/files. But I re-designed it to be a bit stronger and to work a bit better with the excellent GoPro Niterider Lumina Mount (https://www.thingiverse.com/thing:1498626/files).
You need to have one of the k-edge combo mounts (its the only one with holes on the top and bottom) so you can bolt this to it. https://k-edge.com/shop/computer-mounts/wahoo-mounts/k-edge-wahoo-pro-combo-mount/
The lumina is a pretty heavy light, so I suggest you print this with 100% infill. You'll want to print this with a plastic that has good layer adhesion. Nylon or PetG. PLA is probably not strong enough to hold up.
m3 bolts to attach to the k-edge and m4 bolt to connect the two mount pieces.
Category: Sport & Outdoors