1 / 5
Tamiya Blitzer-Monster Beetle/Sand Scorcher rear window louvre - Thickened with locator pins and TPU attachment — zdjęcie 1
1 / 5

Tamiya Blitzer-Monster Beetle/Sand Scorcher rear window louvre - Thickened with locator pins and TPU attachment

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

UPDATE: Added another brace that prints and works well with the flex in PLA, clips in very nicely. Looks about the…

Ocena
0 / 5
Polubienia
30
Pobrania
338
Wydruki
0
Wyświetlenia
2354
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
RC & Robotics
Licencja
Creative Commons — Attribution — Noncommercial

UPDATE: Added another brace that prints and works well with the flex in PLA, clips in very nicely.

Looks about the same from the outside but the original didnt print well for me so i thickened the insides of the slats, added locator pins and made a mount that when printed in TPU allows for a friction fit but is still easy to remove.

The mount might work in PLA as well but then it would need the 3mm screw to be removed.

Mine was printed with build plate only tree supports.

Big Thanks to the originator!

To mount an unmodified Sand Scorcher body on a TT02B, as pictured, see here: https://www.thingiverse.com/thing:5329564

Category: R/C Vehicles

Tagi