1 / 3
FS-GT3B Clip on sling mount and montor/camera attachment point — zdjęcie 1
1 / 3

FS-GT3B Clip on sling mount and montor/camera attachment point

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Thanks to the originators! I cut and modified it so it clips onto the controller, screw holes are still present if one…

Ocena
0 / 5
Polubienia
4
Pobrania
23
Wydruki
0
Wyświetlenia
277
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
RC & Robotics
Licencja
Creative Commons — Attribution — Share Alike

Thanks to the originators!

I cut and modified it so it clips onto the controller, screw holes are still present if one wants to attach it permanently.

Has a loop at the back for attaching a sling and 3mm hole at the front for easy attachment phone/cam/monitor/whatever-you-make-fit holder.

Im including the mount ive modified for the FPV monitor i have, it uses a countersunk screw, a spring washer and a lock nut, the slot on the back of the screen slides onto it and holds enough to be shaken upside down without falling off.

Printed both parts with tree supports enabled.

Category: R/C Vehicles

Tagi