Gridfinity screwdriver rack
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A gridfinity compatible screwdriver rack
- Ocena
- 5 / 5
- Polubienia
- 104
- Pobrania
- 852
- Wydruki
- 5
- Wyświetlenia
- 5200
- Oceny
- 5
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Share Alike
A customizable gridfinity compatible screwdriver rack.
This is a bit of a work in progress. It's meant to be printed in multiple parts to avoid having to use supports. The four legs are attached to the matching holes in the top and bottom parts.
The holes sizes are based on the specific screwdriver set that I have, so you'll most likely want to customize the Fusion360 design to fit your needs. Adjust the holes and the height of the rack.
When printing the legs, rotate them so the flat part is facing the bed. e.g. 45° on Z axis, 90° on Y axis. No supports are needed.
There are no tolerances built into the design, so fitting the legs takes some work. Use a sandpaper or a file on the stubs to make it easier.