Tronxy x5s Electronics Enclosure for Duet Wifi
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
An enclosure designed for the Tronxy x5s printer frame. Was made for an upgrade to a 24V power supply and Duet WIFI.…
- Ocena
- 0 / 5
- Polubienia
- 19
- Pobrania
- 63
- Wydruki
- 0
- Wyświetlenia
- 555
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution
An enclosure designed for the Tronxy x5s printer frame. Was made for an upgrade to a 24V power supply and Duet WIFI. 3x LM2596 DCDC Converters were used to lower the voltage to cooling fans, both for noise reduction and as some fans were 12V. All enclosure parts can be printed with no supports. Designed to be printed on a 180mm x 180mm print bed.
Can mount :
Duet WIFI board.
Power supply
1 MOSFET
2 DC-DC LM2596 Converters
1 120 mm cooling fan + Mesh Dust Cover.
Has holes for :
Cables going to Left/right stepper motors.
WIFI Antenna.
AC Power Socket.
USB Socket.
parts needed:
4 M3x8mm Countersunk :
• 2 – Power socket
• 2 – USB socket
8 M3x12mm :
• 4 – MOSFET
• 4 – 2x DCDC LM2596
4 M3x30mm (To assemble enclosure)
14 M3 Nuts :
• 4 – Assemble enclosure
• 4 – MOSFET
• 4 – 2x DCDC LM2596
• 2 – Power socket
39 M4x10mm :
• 15 – Mount enclosure to printer frame (5x Angle_Bracket.STL)
• 4 – 120mm Fan
• 4 – Power supply
• 4 – Duet WIFI
• 12 – Enclosure Lid
18 M4 Nuts :
• 10 – 5x Angle_Bracket.STL
• 4 – 120mm Fan
• 4 – Duet Wifi
5 M4 2020 T-slot Nut (5x Angle_Bracket.STL)
Category: 3D Printing