1 / 5
Tronxy x5s fan shroud
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A fan shroud for the Tronxy x5s printer that still uses the stock extruder, inspired by the airblaster cooler…
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 33
- Wydruki
- 0
- Wyświetlenia
- 384
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
A fan shroud for the Tronxy x5s printer that still uses the stock extruder, inspired by the airblaster cooler https://www.thingiverse.com/thing:2745951.
Still WIP trying to increase flow rate to the hot end.
Uses 2 40mm x 40mm fans, recommend using M3/M4 screws anywhere between 15mm to 25mm long.
NOTE:
Category: 3D Printer Parts