Marcel The Shell with Shoes On, improved printing
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Slight improvements to a design by 3DWorksbyMatt I used meshmixer to make the stl a solid with a 0.3mm offset. This…
- Ocena
- 5 / 5
- Polubienia
- 26
- Pobrania
- 376
- Wydruki
- 5
- Wyświetlenia
- 1748
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Action Figures & Statues
- Licencja
- Creative Commons — Attribution
Slight improvements to a design by 3DWorksbyMatt (https://www.thingiverse.com/thing:4132334)
I used meshmixer to make the stl a solid with a 0.3mm offset. This closed some donuts and made some walls thicker for printing with FDM. I also scaled down by 61% to be closer to the actual size of Marcel.
I made a simple eye.
Print Settings
Printer Brand:
Prusa
Printer:
I3 MK3S
Rafts:
No
Supports:
Yes
Resolution:
0.15mm
Infill:
15%
Filament: Generic PLA White
Notes:
Body:
Print model tilted 45 degrees backward. Support on build plate. Cooling toward the bottom exposed to supports.
Eye:
Use a filament swap to create a pupil.
Use some kind of mold-able clay to hold the eye.
Mouth made with masking tape.
Category: Creatures