Milwaukee M18 battery holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Hang your tools on a wall or under a shelf.
- Ocena
- 5 / 5
- Polubienia
- 24
- Pobrania
- 348
- Wydruki
- 2
- Wyświetlenia
- 1389
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I couldn't find one I liked so I decided to design my own.
I print these in PLA+, 0.28 layer height, 6 walls and 45% infill with a 0.6mm nozzle. Supports everywhere and they break off pretty easy and clean with the right settings. Maybe a bit overkill but I have printed lots of these and never had one fail.
Mount on a wall or under a shelf in any orientation as the battery will click in and lock in place.
Should take about 2 hours to print and takes about 45g of filament.
Tool holders here: www.printables.com/model/237568-milwaukee-m18-tool-holder