AmeraLabs Town | Calibration for SLA 3D printers
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Town model by AmeraLabs with many details to calibrate and chek on your SLA printer
- Ocena
- 5 / 5
- Polubienia
- 52
- Pobrania
- 1952
- Wydruki
- 19
- Wyświetlenia
- 4196
- Oceny
- 9
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Test Models
- Licencja
- Creative Commons — Attribution — NoDerivatives
Calibration test for SLA printers, may also be used for DLP or other resin 3D printers. Differing from most other calibration models, this one is also a nice display prop so it hopfully won't go straight to the bin after you printed it.
The model tests for 10 different criteria that will help you figure out the capabilities of your printer and resin. This can be especially helpful if you desingn your own models for printing, or just to check if everythink is okay with your printer, comparing it to older prints.
You can find the full list of all feature to discover and to check on in this article
Model by AeraLabs - www.ameralabs.com | Check also their other content