Pool Cup Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This minimalist drink holder is optimized for Bestway pools. But there is also a parametric Fusion360 file attached.
- Ocena
- 4,167 / 5
- Polubienia
- 128
- Pobrania
- 747
- Wydruki
- 8
- Wyświetlenia
- 3400
- Oceny
- 6
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This universal cup holder was designed for a Bestway pool (pool pipe diameter: 50mm) and different glasses (ring diameter: 75mm, ring height: 130mm). However, I drew it parametrically in case someone has a different pool or wants to hold different glasses in it. The following can be changed in the Fusion 360 file: pool pipe diameter, cup diameter, cup height, ... and much more.
Material costs
I designed the model to be as minimalist as possible. The holder is printed in 2 hours and only requires about € 0.75 PETG. (The Original Bestway Cupholder costs € 7.50)
Print settings
Supports: none
Infill: 20%
Nozzle: 0.4mm
Layer: 0.2mm
Filament: PETG (ASA)
Post processing
After printing, the ring only has to be snapped into the hook and locked with the small block.