Mingda Magician X Filament Holder Riser
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I wanted to be able to have a filament spool holder with ball bearings for my new Mingda Magician X vs the stock…
- Ocena
- 4,8 / 5
- Polubienia
- 20
- Pobrania
- 220
- Wydruki
- 7
- Wyświetlenia
- 965
- Oceny
- 5
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Share Alike
I wanted to be able to have a filament spool holder with ball bearings for my new Mingda Magician X vs the stock holder. I took the two holders and merged them using Tinkercad to be able to have a base holder from Tueftler-Maker and top slot from HugoHuge to make this.
608ZZ bearings x 2 needed for HugoHuge's roller and guide that I have in the Thing files as well.
I will add some pictures later of my actual holder.
If the spool spins too well, you can add a piece of paper between the bearing and the roller holder which just makes it a tighter fit to the bearings.
Print Settings
Printer:
Magician X
Rafts:
Yes
Supports:
Yes
Infill:
20% cubic
Filament: Overture PLA 1.75mm Orange
Notes:
Riser post and holder guide: 1.2mm wall thickness, print speed of 50mm/s and .25 line height, Infill: 40% cubic, Support pattern: Zig Zag, Support density: 20-30%, Build plate adhesion: 5mm brim just to aid in taking off the plate. You can lay both flat on their sides to print.
Roller: 1.2mm wall thickness, print speed of 30mm/s and .2 line height, Infill: 20% cubic, Support pattern: Zig Zag, Support density: 20-30%,. You will want to have it print vertical and use supports and a good sized brim for this. I used a 10 mm brim. I also printed this by itself.Category: 3D Printer Accessories