1 / 2
Shackle Mount Plate for 3DSets Bamboo4x4 Rear Bumper
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Mounting plate for shackles with a 10x10 mm bolt pattern for the Bamboo4x4 rear bumper.
- Ocena
- 5 / 5
- Polubienia
- 28
- Pobrania
- 57
- Wydruki
- 1
- Wyświetlenia
- 616
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 1) (Komentarze: 1)Remiksy (0)Kolekcje (40)Powiązane
This is a mounting plate for shackles and other accessories with a 10x10 mm bolt pattern. It reuses the original mount points of the Bamboo4x4 rear bumper pieces.
Hex nut cutouts are for M2 nuts (4mm socket).
I've printed the part with PETG for strength.