Magnetic Socket Toolbox Organizer Half Inch 1\2"
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Toolbox socket organizers for 1\2" sockets with magnets to hold the organizers in place.
- Ocena
- 4,333 / 5
- Polubienia
- 190
- Pobrania
- 664
- Wydruki
- 3
- Wyświetlenia
- 6018
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial
Toolbox socket organizer for 1\2 inch sockets. The base is designed to accept a 10x3mm magnet as the base is printed at a .2 layer height. I printed all of these on a Creality CR-10S and placed a M25 pause between layer 16 and 17 in order to put the magnet in the base while it is printing. I printed 9 bases at a time with them spaced out across the build plate to make sure the magnets didn't jump out of place.
Once the base and insert are printed, I used hot glue to put them together. I'm sure super glue or gloop, etc. would work as well. I also printed the insert in a bright color to make it easy to spot a missing socket. I used green for metric and white for SAE.
The spacer allows for additional room between the sockets for the larger ones.
The attached gcode files were sliced in PrusaSlicer for a Prusa Mini but were not tested and do not have a pause to allow for the magnet to be inserted.
3/8" and 1/4" also available in my other models.