Heltec WiFi LoRa 32 (V2) Development Board Case
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a case for the Heltec Wifi LoRa 32 (V2) development board (https://heltec.org/project/wifi-lora-32/). I wanted…
- Ocena
- 5 / 5
- Polubienia
- 17
- Pobrania
- 257
- Wydruki
- 2
- Wyświetlenia
- 1974
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a case for the Heltec Wifi LoRa 32 (V2) development board (https://heltec.org/project/wifi-lora-32/).
I wanted to be able to have a case that can hold a lithium battery so this is what I came up with. I've included a version of the lid that allows pins to go through in case you soldered the pin headers on.
I've also included a file with the labels for the case in the event you want to use a multi-color printer.
There are some overhangs and bridges but I've found that supports are not needed for the parts.
Print Settings
Printer Brand:
Anycubic
Printer:
Predator
Rafts:
No
Supports:
No
Resolution:
0.2
Infill:
20%
Filament: any any any
Category: Electronics