1 / 2
Robo 3D R1 Y Axis Pillow Block LM8UU
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I found that the LM8UU bearings would wobble in the factory pillow block due to their being too much play in the…
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 39
- Wydruki
- 0
- Wyświetlenia
- 302
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I found that the LM8UU bearings would wobble in the factory pillow block due to their being too much play in the bearings. I created a design that will hold the bearings in place much better and gives a tighter fit and has eliminated the wobble that I was getting.
You'll need to print a total of 4 of these.
Print Settings
Printer Brand:
Robo 3D
Printer:
R1 ABS + PLA Model
Rafts:
No
Supports:
No
Resolution:
0.12
Infill:
30%
Category: 3D Printer Parts