HD Radio RCP7 Remote Control Battery Cover
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a model of the battery cover in the HD-Radio RC-P7 remote control. Best way to print this is on its side. You…
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 34
- Wydruki
- 0
- Wyświetlenia
- 179
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a model of the battery cover in the HD-Radio RC-P7 remote control.
Best way to print this is on its side. You will need to use supports to support the tabs that stick out.
There is room for improvement as the bottom has a slight curve that I didn't add in the model, but I may end up adding that soon. If you want to improve upon it, I have included a .step file so that you can import this into your 3D modeling tool.
If you do end up making improvement, please share your changes.
If you end up printing this, please take a picture and post a make of your print.
Tips are always appreciated.
Print Settings
Supports:
Yes
Category: Replacement Parts