Geeetech A10M Chimera Mount v2
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The original mount that I designed worked well, but I didn't like the cooling solution that I was using. I've modified…
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 29
- Wydruki
- 0
- Wyświetlenia
- 288
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution
The original mount that I designed worked well, but I didn't like the cooling solution that I was using. I've modified the design to allow two 5015 blower fans to be used on each side. The improved cooling makes a huge difference.
You'll need some M3 screws, and the holes for the screws are a bit tight and give the screws something to bite into. If you find the holes too tight, you can drill them open a bit. I can also modify the design to have bigger holes if anybody wants.
I also created a BL Touch mount that will allow it to be mounted onto the 30mm fan on the front.
I would recommend printing with resin, PETG or ABS as these parts will be in really warm areas and PLA will soften and deform when it gets really warm.
Category: 3D Printer Accessories