Geeetech A10M Chimera (Clone) mount with BLTouch holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I ran across a Chimera clone for a very low price and decided to try it out. I have found that the mixing nozzle…
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 23
- Wydruki
- 0
- Wyświetlenia
- 286
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
I ran across a Chimera clone for a very low price and decided to try it out. I have found that the mixing nozzle doesn't mix well for PLA filaments but does work well with translucent PETG filaments. For the times that I want to print with multiple colors of PLA, or even with different materials such as PLA and PVA, or ABS and HIPS, creating a purge tower felt like a waste of filament and slowed down the time it takes. Having a dual nozzle setup gets around that issue.
I designed this mount for the Geeetech A10M and is based on a Chimera clone. Print this with PETG, ABS, resin, or anything that can withstand high temperatures.
Print Settings
Printer Brand:
Anycubic
Printer:
Predator
Rafts:
Doesn't Matter
Supports:
No
Resolution:
0.2mm
Infill:
20%
Filament: n/a PETG, ABS, or any high temp material
Category: 3D Printer Parts