1 / 5
Lightweight Cooler for Ender 3 / Voxelab Aquila - 5015 Blower
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
An improved design that hits all the marks for my needs.
- Ocena
- 5 / 5
- Polubienia
- 98
- Pobrania
- 597
- Wydruki
- 3
- Wyświetlenia
- 4022
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- GNU General Public License v3.0
SzczegółyPliki (6)Wydruki i komentarze (Wydruki: 3) (Komentarze: 25)Remiksy (4)Kolekcje (132)Powiązane
This is an improved version of a hotend cooler design I made a while ago. Its airflow is substantially better than the previous version. As well, you can now peek at the nozzle from the front of the machine so that you can see how the print is going down.
Notes:
- I printed it in ABS. I can't say for sure but it might work with PETG. Definitely do not use PLA.
- I had to reorient it in the slicer as shown in the pic.
- Paint on supports was applied as shown in the pic. (Print still only takes 1 hour 41 mins).
- Two versions are included here. One supports using heat-set inserts and the other is for those that want to screw into plastic. I've personally only made the heat-set version but I can't see why the plastic version wouldn't work.
- The arm that extends to the 5015 blower fan's mounting hole may require some adjustment after print (depending on your cooler). If so, just heat the arm with a torch and refine the position.