Ender 3 + SKR v1.3 - mounting plate
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
SImple mounting plate to mount SKR v1.3 board in Ender 3. All hardware of ender 3 remains the same. Mounting As board…
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 52
- Wydruki
- 0
- Wyświetlenia
- 350
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution
SImple mounting plate to mount SKR v1.3 board in Ender 3. All hardware of ender 3 remains the same.
Mounting
As board sits sideways, there is no way to access USB port and SD card. SD card is accessible after opening the top case and it can be replaced without doing anything more.
For USB connection (Octoprint or anything similar), I cut and soldered broken USB cable to the bottom side of SKR board (USB pins are marked there) and put it outside to where my Raspberry PI is.
I also recommend routing all motor/end-stop and display cables under the mounting plate to make it tidy and easier...
Category: 3D Printer Parts