Soft Jaws for Vice
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
These are soft jaws for a 4" vice. They cover the existing steel jaws which measure 4 1/2" by 3/4" (or 115mm by 20mm).
- Ocena
- 5 / 5
- Polubienia
- 39
- Pobrania
- 119
- Wydruki
- 1
- Wyświetlenia
- 890
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
These are soft jaws for a 4" vice. They cover the existing steel jaws which measure 4 1/2" by 3/4" (or 115mm by 20mm). They have cutouts for holding round objects and for better grip.
No screws, magnets, or other fasteners are required; it simply slides on over the existing steel jaws.
I recommend printing in TPU at relatively high infill. PLA will work, but the jaws will be more likely to mar objects than with using a more flexible filament. Obviously you will need to print two to make a set.
If you have interest in these jaws for a different size vice, feel free to message me with the specifications.