Prism Quantum Camera Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Runcam5/GoPro Session camera mount for a Prism Quantum sport kite.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 9
- Wydruki
- 0
- Wyświetlenia
- 147
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a proof-of-concept for a stunt kite camera mount. I mostly wanted to feel out how the camera would change the flight characteristics before putting too much effort into the design. This was made to attach my Runcam5 to my Prism Quantum with zip ties, though it should be compatible with most stunt kites that have a t-fitting at the lower spreaders. It should also fit a GoPro session, but I haven't tried it yet. I used an FPV battery strap for extra security but you may not need it. You'll also likely notice that I cut away a bit of the lense hole. This is pretty much necessary to avoid getting overlap. I will soon be posting a V2 as well as a test mount for the upper spreader instead, these will address the poor hole sizing.
Brief Demo:
Printed with TPU, .28mm, 20% infill. Print on its side with supports touching build plate enabled.