1 / 3
Sparrows Various Tools Practice Lock Holder Handle Progressive Locksports
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Disclaimer - This is a proof of concept digital design only. This digital design is for learning purposes only. This digital design is not for production.
Made these to stop my hand from cramping up, various sizes, I use the 4x 75mm version.
New versions to allow 2x and 4x locks.
Added Crenulated nut tool and follower tool.
Tolerances are very tight, so make sure your printer is calibrated, if it is too tight scale up 1% or 2%, if too loose scale down.
Hole in the back of the holder to push out the lock, I use a screw driver, allen key, pen or whatever is on hand.