0-waste jumpkit
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Jumpkit, like a jetpack...but smaller. This is an add-on for the 0-waste robot kit.
- Ocena
- 5 / 5
- Polubienia
- 187
- Pobrania
- 326
- Wydruki
- 6
- Wyświetlenia
- 2643
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Action Figures & Statues
- Licencja
- Creative Commons — Attribution
0-waste: jumpkit
"...so you are dreaming to fly your robot? Well, you are piloting the wrong machine... but take this jumpkit, find a low gravity spot and enjoy some loong jumps!"
Design:
This is an add-on for the 0-waste robot kit, the complete model is downloadable from my profile: https://www.printables.com/it/model/191862-0-waste-a-multipurpose-robot
No support, no glue and no screws are needed.
There are 4 files: one for each color, the parts are oriented in a way that does not require supports.
Notes:
I tested this model on a full stock Ender3pro with cheap, wet PLA+ filament. I am quite confident that your print will result better than mine.
I suggest 0.1mm on layer height and at least 1mm on wall/top/bottom thickness.
Post-Printing:
It only need to be assembled and mounted on the 0-waste robot kit.