1 / 2
Aranet4 CO2 Monitor Protective Case with Strap Hanger — zdjęcie 1
1 / 2

Aranet4 CO2 Monitor Protective Case with Strap Hanger

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Aranet4 CO2 monitor protective case with strap attachment.

Ocena
0 / 5
Polubienia
17
Pobrania
154
Wydruki
1
Wyświetlenia
2125
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

Design credit to Lizzie Rothwell and Akiva Rubin
Uploaded from https://aranet.com/print-out-your-own-aranet4-3d-cover-case/
Uploaded to Printables to widen exposure.

This is a protective case for an Aranet4 Carbon-dioxide (CO2) monitor.  Carbon-dioxide monitors can assess how Covid-risky a space is because they help tell you whether you’re breathing in clean air. They measure the concentration of carbon dioxide, which people exhale when they breathe, along with other things like, potentially, virus particles. The more well-ventilated a space, the lower the reading on the monitor screen — meaning not only less carbon dioxide but also less of the stuff like Covid that might make people sick.

Additional Parts: 
(4) M4x12 Flathead Screws
(4) M4 Nuts
(2) .9" shank diameter nails (head trimmed off to a length of 1.5")
(1) 1" Velcro Strap of some kind. Only required if you want to attach a strap.

Step 1: Insert nuts into alcoves in main housing.  Cover each one with a nut wedge.  Wedges may need to be lightly filed on the side to fit.

Step 2: Place Aranet 4 (with batteries already inserted) in main housing with the display face up.  Make sure sensor opening in Aranet4 are aligned with holes in housing.

Steps 3-5 are only needed if you are attaching a velcro strap.

Step 3: Thread trimmed nail through loop in velcro and position at top of Cover.  Position second trimmed nail at bottom of cover and align cover with housing.

Step 4: Screw all bolted through Cover into nut held within housing.

Step 5: Wrap velcro strap around lower trimmed nail and double back to create adjustable attachment loop.  

Tagi