1 / 3
Oathsworn Might Tray for Sleeved Cards
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Oathsworn Might Tray for Sleeved Cards (using Sleeve King "Everdell" sleeves)
- Ocena
- 0 / 5
- Polubienia
- 12
- Pobrania
- 142
- Wydruki
- 0
- Wyświetlenia
- 1143
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Board Games
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 0) (Komentarze: 1)Remiksy (2)Kolekcje (22)Powiązane
Oathsworn's included tray isn't the best fit for sleeved cards (although it's pretty close). This is my attempt at one with a little bit more room for the cards, whilst still fitting the lid.
I used Sleeve King “Everdell” sleeves - I found the Mayday ones too tight in one direction, and too long in the other.
The lid isn't super tight - when picking it all up, make sure you lift from the base.
Printed at 10% infill, 0.2mm variable layer height