Petromax inner casing for electric lightbulbs, Fits with Petromax / Geniol 829 & 828 (500cp & 350cp)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a 3D-Printable inner casing to convert your Petromax from kerosene to electric.
- Ocena
- 5 / 5
- Polubienia
- 4
- Pobrania
- 97
- Wydruki
- 1
- Wyświetlenia
- 701
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
With this 3D-Printable inner casing you can convert your Petromax / Geniol kerosene lamp from kerosene to electric. The electric inner casing replaces the normal one (where the gas mantle is attached), you can store it savely in my gas mantle saver.
You'll need a lamp socket with E14 threads. It needs to have threads on the outside with an outer diameter of less then 3cm / 1.81 in.
In order to assemble it you need to thread the cable through one of the holes in the Cap of the lamp, since most plugs are to big to fit through the holes. After that you can connect the cable to the lamp socket and attach the inner casing. Now the inner casing can be placed in the lamp as shown, and the cap can be connected. Tadaa: You now have the most beautiful electrical lamp you could imagine, while still being able to revert to kerosene in a blink of an eye.