Bag Clip with Slider
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a bag clip like many others with a unique twist, a slider to close it together instead of a clip.
- Ocena
- 0 / 5
- Polubienia
- 15
- Pobrania
- 73
- Wydruki
- 0
- Wyświetlenia
- 826
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
After getting my new printer and seeing this contest I thought about the bag clips we use here and always thought they bend a lot, so I tried to come up with an idea, and this is where the slider comes in, it presses the sides better together and makes a stronger seal, the limitation being it's only possible to place on top.
Currently there's only a 10cm one, but I will add more sizes later.
Printing - Thing to consider
I strongly recommend printing it with supports since without can give some variable results where they get fused together.
If you want to save around 20 minutes you can print the slider with a larger layer height as it is not as sensitive to layer height, for the clip I recommend staying at 0.2mm or less.