1 / 1
Relic for first tech challenge
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I changed the scaling of the design so it was full size and removed some plastic to make it print faster Update: my…
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 5
- Wydruki
- 0
- Wyświetlenia
- 87
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Engineering
- Licencja
- Creative Commons — Attribution
I changed the scaling of the design so it was full size and removed some plastic to make it print faster
Update: my team went to our first scrimmage and I Realized that the relics are much smoother than this design as it has been scaled up. This should still work for testing the logistics of a design
I recommend printing at about 5% infill with two shells for fast printing and to reduce weight.
Category: Engineering