Alitove 5V 60A PSU cover
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Alitove 5V 60A Power supply cover with XT60 openings. The opening for the power cable is 7mm which fits standard…
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 34
- Wydruki
- 0
- Wyświetlenia
- 412
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Alitove 5V 60A Power supply cover with XT60 openings. The opening for the power cable is 7mm which fits standard computer power cables with the male end cut off.
Here is the link for the XT60 connectors I used to assemble mine. You will also need 2.5mm screws to secure the XT60 connectors. I used the kit found Here.
I also used 4mm screws 8mm long to attach the cover to the PSU, and zip ties (cable ties) around the top of the power cable Inside the cover to secure it from being pulled out.
The XT60 connectors are Amass XT60E-M Mountable XT60 Male Plug Connector in case the link does not work in the future and you need to search for them.
I also included the XT60 plugs to protect the prongs in the unused plugs from being able to short out on anything they may come in contact with. The XT60 plugs covers were printed in TPU.
We used these to run all the LED's at our latest Whooptopia track, and I will continue to use these power supplies for tracks in the future as well as LED projects around the house.
Print Settings
Printer:
D-BOT
Rafts:
No
Supports:
No
Resolution:
.2mm
Infill:
40%
Filament:
Polymaker PETG
Clear
Category: Electronics