Dart Case
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This Dart Case was influenced by https://www.thingiverse.com/thing:3314601 The Lid is held in place with a toggle,…
- Ocena
- 4,667 / 5
- Polubienia
- 60
- Pobrania
- 611
- Wydruki
- 7
- Wyświetlenia
- 3364
- Oceny
- 6
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Toys
- Licencja
- Creative Commons — Attribution
This Dart Case was influenced by https://www.thingiverse.com/thing:3314601
The Lid is held in place with a toggle, latched with a piece of 1.75 TPE.
This case fits steel tip darts from 140mm to 155mm in length and up to 7.25 mm in Diameter and up to 36mm flight
Print Settings
Printer Brand:
Creality
Printer:
Ender 5
Rafts:
No
Supports:
Yes
Resolution:
0.2
Infill:
10%
Filament:
Azure Film PLA+
Notes:
Printed with a 0.4mm nozzle
@0.2mm layer height2 perimeters
10% infill
I uploaded 2 case STL files, One with the toggle attached and without.
I printed without the toggle attached and printed the toggle part at 100% infill
Category: Toys & Games