SOVOL SV02 Sailfin Direct Drive Mod
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a SOVOL SV02 mod of the excellent Sailfin extruder together with and another direct drive mod
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 19
- Wydruki
- 0
- Wyświetlenia
- 832
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
I didn't design anything here : this is a mix of the excellent Sailfin remix designed by SIVIS-JOE ( https://www.thingiverse.com/thing:5135793 ) and the direct drive plate designed by MrHasBean for the SOVOL SV02.
Please note that I chosed to convert only one extruder to direct drive as I consider that it is overkill to convert both extruders.
I've been using this mod for >100h printing, so far I consider this design is ok.
Additionnal parts needed :
- Pancake NEMA 17 motor having with integrated 10 teeth gear (those used for the voron Stealth burner, or the Sherpa / Sailfin / orbiter designs). Including at least 80cm cable. I use this one https://fr.aliexpress.com/item/1005003056906725.html
- BMG dual extruder (clone) : all gears and parts will be reused except the body. You can find that for 10€ on aliexpress.
- 22.5mm bowden tube
Unlike the original plate from MrHasBean , this time you won't need to drill a hole in the original sovol plate, I reused an existing one. You may need some spacers as my design is also compatible with my SV02 fan shroud design (see https://www.printables.com/fr/model/238818 ).
A few supports are needed, but nothing difficult, see the picture. The two needed supports are shown, you can block all other supports.
Best results using 0.15mm layer
I printed it using PETG Carbon and HIPS Yellow. So far no problem, even for printing ABS.
Category: 3D Printer Parts