Elegoo Mars Plate Holder Removal Tool
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Finally made something to aid with print removal.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 73
- Wydruki
- 0
- Wyświetlenia
- 1068
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Finally made something to aid with print removal.
-Includes 2mm channel to hold plate in place
-Cut out for the metal 'bolt'
- Angled to allow the remaining resin to drip off the far end
- Raised end to catch any drips and contain them within the unit (Not Pictured)
Angled holder to account for the increasing thickness of the build plate towards centre
Stock Resin dripper should hold the unit down flat (as the metal head of the plate is heavier than most prints are likely to be).Fusion Files : https://a360.co/37JX4i4
Printed at 0.35mm layers (hence the stepping) with 0.5mm nozzle in ~4 hours.
Print instructions
Unassociated tags: elegoo mars pro, mars pro
Category: 3D Printer Accessories Print Settings
Printer: Anycubic Chiron + e3d hermera
Supports: No
Infill: 20
Notes:
0.5 mm tolerances