AMD CPU Box compatible Ryzen Zen+ ZEN2 : 2600X 3700X etc.
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Improved version from Ampera's box : Fillet everywhere pimped using Ryzen design Snapping system for some lids (see…
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 76
- Wydruki
- 1
- Wyświetlenia
- 590
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution
Improved version from Ampera's box :
- Fillet everywhere
- pimped using Ryzen design
- Snapping system for some lids (see file name)
You can also get a basic Zen 2 Badge for people who want to pimp their setup.
You can get a blank lid fitting any AM2 AM3 AM4 AMD CPU.
To get dual color just like the picture, print both pieces at the same time (bottom and lid) and insert a M600 (change filament) at 3.9mm height.
If your snap system is too tight or loosy, put your lid in hot water (50°C) for 10 to 20s then you will be able to pinch or enlarge slightly the lid edges.
Print Settings
Rafts:
No
Supports:
No
Resolution:
0.1 to 0.2
Infill:
15%
Filament: Ice filament PLA Red + Black
Notes:
Don't squish the first layer too much or the text will get reduced.
Category: Tool Holders & Boxes