ChipClip Crocodile
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Print in Place crocodile clips with a display stand
- Ocena
- 5 / 5
- Polubienia
- 52
- Pobrania
- 102
- Wydruki
- 4
- Wyświetlenia
- 1285
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial
I don't like the clips bouncing around the house, because I can't find them when I need them.
so I decided to make a stand not only to store them but also to display them, and now they can even be on display somewhere in the kitchen as decor while you need them.
The union between faces and body is based on pressure, so the clearances are quite tight and will depend on the calibration of your printer. I made a test model so you can check before printing the full body: print just a "duck face" and "body test" to test fit and scale as needed between 99% and 101% in 0.5% increments
In total you need to print 3-“face” and 1-“body ”
to print I used
Material: PLA/PETG
Layer height: 0.28
Nozzle diameter: 0.4 or 0.6
Infill: 12-15
Perimeters: 2
Supports: NO, as long as it is printed in the orientation I show in the images
Printing time: about 2 hours (not counting the test)
Amount of material: about 22 grams (not counting the test)
I uploaded two sizes, one for little clips that you can use with single serve chips for example (the one with the specs here). and the other bigger to use with family size bags or something like that (files with “200” in the name)
this is one member of my original "HomePals" collection that you can see here:
________________________
If you like my designs and want to support me or sell physical prints, you can check out my patreon
https://www.patreon.com/meafdesigns
________________________