Led Hexagonal Panels
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I took BigJim36's design and modded it to my needs. I've added a tab which not only adds a screw hole to mount it…
- Ocena
- 0 / 5
- Polubienia
- 114
- Pobrania
- 323
- Wydruki
- 0
- Wyświetlenia
- 3360
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial
I took BigJim36's design and modded it to my needs. I've added a tab which not only adds a screw hole to mount it cleanly but adds a way to cable tie to the wires out of the way. I also moved holes to where I need them.
I've have added new piece to put the wemos d1 mini I used for the controller. The wemos friction fits on the inside.
I used 27 leds per panel (60leds per meter), you can probably fit 28 in each panel but I wanted 11 panels. A 5m strip had 3 leds left over.
Using a 5v 20amp power supply which I created a cover for here: https://www.thingiverse.com/thing:4945757
The code I used was from here: https://github.com/NimmLor/esp8266-nanoleaf-webserver
These are very helpful when wiring: https://www.amazon.co.uk/SRunDe-Connector-Controller-Adapter-WS2812B/dp/B08TLZBCLC/
LEDs used: https://www.ebay.co.uk/itm/124295445848
Power supply used: https://www.ebay.co.uk/itm/384284198672
PLA used was Sunlu Black PLA+ and White PLA+
Category: Electronics