X motor mount with Integrated Limit switch upper
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I wanted to use Banholm's design for the X motor mount but after printing it I noticed it wouldn't work as the limit…
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 8
- Wydruki
- 0
- Wyświetlenia
- 111
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I wanted to use Banholm's design for the X motor mount but after printing it I noticed it wouldn't work as the limit switch upper was in the way.
Originally remixed from this, you'll need to download that for the other half: http://www.thingiverse.com/thing:1730523
I integrated the two and replaced the text (the a's were incorrect on banholms original).
I also remixed ThingiRob's limit switch too as it was slightly off. I beefed up the brace as 1mm was a bit flexible.
The limit switch is attached to ThingieRobs brackets: https://www.thingiverse.com/thing:1457449
Use a spring on the adjustable screw to give it tension and stop it moving.
Category: 3D Printer Accessories