Xiaomi Yi Home (ants cam) Stand - Printer cam
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I needed a taller holder for the ants cam as the standard one is too short for monitoring prints so created this. This…
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 52
- Wydruki
- 0
- Wyświetlenia
- 363
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I needed a taller holder for the ants cam as the standard one is too short for monitoring prints so created this. This is my first design so if you want to remix it and make it better go ahead.
I printed at 60mm/s in a 0.3 layer height. No supports are required.
If like me your Yi has a loose usb connector and you need to add a bit of tension to the cable I've added a separate design with a wire clip for a 3mm cable. Not tested it yet but can't see why it won't work. Looking at it you'll need supports for that, no supports are needed for the original design.
Update: learned I could go back in my timeline in fusion 360 so went back and fixed the base. I've left the old one available as you may prefer that base.
Print Settings
Printer:
Tevo Tarantula
Rafts:
No
Supports:
No
Resolution:
0.3mm
Infill:
30%
Category: Gadgets