Star Wars split Droid Popper EMP / Thermal Detonator for 1:12 , 1:6 and 1:1 scale figures and cosplay
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Split version of the detonator from the animated series.
- Ocena
- 5 / 5
- Polubienia
- 75
- Pobrania
- 253
- Wydruki
- 2
- Wyświetlenia
- 1248
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Props
- Licencja
- Creative Commons — Attribution — Noncommercial
UPDATE: realised that the 3 front lights are supposed to be on the upper half not the lower half so I completely remade them. look for v3 files in the file list.
Here is my attempt to create the split droid popper / thermal detonator from Star Wars (the split version attaches to walls in the animated series)
It comes in two main halves and the 1:1 version includes recesses in the center of each half for magnets to be placed so the two halves can be magnetised together as well as two small guide pins to keep the halves aligned.
The 1:12 and 1:6 versions include a shallow socket in one half and a plug on the other they can hopefully plug together smoothly (some minor adjustment may be needed depending on your printer settings as over/under exposure with have an effect on fit).
The 1:12 version is scaled for use with 6 inch figures while the 1:6 version should be compatible with 12 inch figures. The 1:1 scale files are for life size props/cosplay.
Any issues please let me know. Have fun!