M5 Wall Mount for WeatherXM Weather Monitoring Station
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a wall mount for the WeatherXM crypto miner implementation that uses the M5 Stack.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 20
- Wydruki
- 0
- Wyświetlenia
- 328
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution
The WeatherXM project is a distributed weather monitoring project that pays weather station hosts in a cryptocurrency. The monitoring unit is outside, but the M5 base station for the weather station is indoor-only. It is meant to sit on a desk, but that just got in the way, so I created this solution to hang it on a wall.
(Note: the M5 is a modular, generic system, so this mount will fit any application that uses https://m5stack.com/ parts)
Parts Required:
- M5 flat-head screw
- Small “Command” brand removable adhesive to attach the mount to the wall.
Print the two parts and then assemble with the M5 screw. I suggest screwing the two pieces together before hanging it on the wall as the screw has to cut it's own threads (unless you put in an insert or pre-cut them) and this process does require some force.
The rectangular counter-sink in the back will fit a small “Command” adhesive strip and it will allow the mount to stay flush against the wall.
Happy WeatherXM crypto mining!