Klemco and TH3D Multi Mount Part cooling fan (hero remix)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A small remix I needed for part cooling my new hot end.
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 85
- Wydruki
- 0
- Wyświetlenia
- 963
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a quick remix I did for my CR10-V3 for part cooling with my Klemco mount as I found the already avalible mounts from Klemco to be insufficient for what I needed as I needed cooling from both sides with minimal hardware.
This is the first revision I made and it turned out way better than I thought it would.
For spacing and mounting you'll want to bring the nozzle to the bed and use a ~2mm spacer (Like the stock nozzle wrench for most printers) under the fan duct to get the right mounting height. And it should mount via M3 bolts, I do not recall the length needed.
Happy printing and tell me how you like it and how it works out for you.
EDIT: This appears to also be compatible with the TH3D Multi Mount as that is basically a direct copy of the Klemco mount.
This is a remix of these 2 items.
HeroMe gen 5: https://www.thingiverse.com/thing:5210744
Klemco Part Cooling Fan: https://www.thingiverse.com/thing:4555858