Magic LCD knob two color printing without MMU2S for Prusa i3 MK3 & MK3S
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Did you know that you can use the color change/ pause print function to insert a lot of things inside your model?
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 45
- Wydruki
- 0
- Wyświetlenia
- 283
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
Magic LCD knob two color printing without MMU2S for Prusa i3 MK3 & MK3S
I used this version of PrusaSlicer:
Version: 2.4.2+win64
Build: PrusaSlicer-2.4.2+win64-202204251110
Did you know that you can use the color change/ pause print function to insert a lot of things inside your model?
First, print out the small part in one color, which looks like a coin.
I used the following settings in PrusaSlicer:
Infill: 100%
Perimeter: 4
Solid layers Top: 3
Solid layers Bottom: 4
Now please print with second color.
Now load the knob in PrusaSlicer.
Place the knob honeycomb side down on the printer.
Stop at 1.6 or 1.8 height, insert the small part (which looks like a coin) and continue printing.
I used the following settings in PrusaSlicer:
Infill: 100%
Perimeter: 4
Solid layers Top: 5
Solid layers Bottom: 5
If you don't know how to take such a break, please watch this video first.
Additional notes
If you like this design, please give me a like and post makes.