Big Bag Clip with screw on cap
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Big Bag Clip with screw on cap with print-in-place joint for cereal bags and similar.
- Ocena
- 4,833 / 5
- Polubienia
- 349
- Pobrania
- 2105
- Wydruki
- 31
- Wyświetlenia
- 7624
- Oceny
- 24
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial
This model was inspired by: https://www.thingiverse.com/thing:4744855
I've made this bag clip so it's big enough to use on cereal bags. The maximum length of a bag you can clip this on is around 160 mm. The diameter of insert is 50 mm. The screw cap has textured sides for better gip. The arms are connected with a print in place joint. Tolerance is 0.4 mm per side, so it should move nice and freely right after printing. I've integrated some tabs on the sides of the insert, which correspond to cutouts in the clip, which stops it form rotating inside the bag insted of unscrewing the cap.
All you see in the photos was printed with PETG on my custom CoreXY at 0.2 mm layer height.